New England Solar Electric, Inc.

Inverters

XW System Accessories

XW System Control with LCD Display

741-011     XW System Control     $300

The XW System Control Panel features a graphical, backlit LCD display that provides system configuration and diagnostic information. The control unit is connected to the XW system components (XW inverter(s), XW charge controller(s) and auto generator start module) using Cat 5 cable in the Xanbustm enabled network. No other connection devices are required except for the cat 5 cable between each component.

---

XW Automatic Generator Start

741-012     Automatic Generator Start     $200

This module automatically activates a generator to provide the power to the XW inverter to charge a depleted battery bank. The user can define whether the generator should be activated on low battery bank voltage, stste-of-charge, or load on the inverters. The AGS can start both two and three wire start controls.

---

XW Power Distribution Panel

741-010     Power Distribution Panel     $1,500

This module automatically activates a generator to provide the power to the XW inverter to charge a depleted battery bank. The user can define whether the generator should be activated on low battery bank voltage, state-of-charge, or load on the inverters. The AGS can start both two and three wire start controls.

---

XW Conduit Box

741-015     XW Conduit Box     $175

Only necessary for multiple inverter installations.

---

XW DC Panel Mount Circuit Breakers

741-019	15A	$25
741-018	20A	$25
741-017	30A	$25
741-014	60A	$25
741-020	60A	$25

Use for XW inverter DC disconnect. Only necessary for multiple inverter installations.

---

XW AC Rail Mount Circuit Breakers

343-5xx	15, 20, 30, 40 or 60A Single Pole	$15
343-6xx	30 or 60A Double Pole	$30

DIN Rail mount AC circuit breakers for load disconnect on XW inverter systems.

---

TR Series Options:

Temperature Compensation Sensor

Remote On/Off Control with Status LED

741-260

RC8 Remote Control; 50 ft cable

$110

741-245

TRCB Conduit Box Fits on AC or DC end of Inverter 1/2",3/4",2" and 2-1/2" Knockouts

$250

 

---

DC Disconnect for TR Series Inverters

741-251	DC175 175A Disconnect	$329
741-250	DC250 250A Disconnect	$329

 

 

 

753-002

Inverter Bypass Box

$129

Xantrex TR SERIES INVERTER

740-030	TR 1512 - 1500W 12V 70A Bat Charger	$950
740-031	TR 2412 - 2400W 12V 110A Bat Charger	$1,145
740-032	TR 1524 - 1500W 24V 35A Bat Charger	$950
740-033	TR 2424 - 2400W 24V 70A Bat Charger	$1,145
740-034	TR 3624 - 3600W 24V 70A Bat Charger	$1,425

The TR Series inverter is the most popular we sell. With its range of power sizes, large internal battery charger, automatic switching capability and low price, they are hard to beat.

For 12 volt systems the 1512 and 2412 are available. Suppling 1500 or 2400 watts of power with integral internal battery chargers, they are fully capable of powering an alternative energy household, cottage or camp. They each have the ability of automatically switching AC from your generator (or the power grid) to your AC distribution panel while charging your battery bank. The TR2412 will be needed if a deep well pump must be powered. It will run a correctly chosen 1/2 hp submersible pump and a 1/3 hp washing machine at the same time.

For 24 volt systems the 1524, 2424 and 3624 are available. As the name implies, they will supply 1500 to 3600 watts to your loads or charge your battery bank when a generator or grid power is available. They have the same AC switching capability as the 12 volt models. The 1524 can be used in homes, cottages or camps with the right AC submersible pump. The TR2424 will power a correctly chosen 1/2 hp pump and washing machine at the same time while the TR 3624 will power any 1/2 hp pump with a washing machine.

The TR series are made to wall mount (though they can sit on a table). All controls and indicators are conveniently mounted on the front panel. The battery charger controls have been simplified for ease of use. These inverters also have UPS (uninterruptible power supply) capability with their 10 to 16 millisecond transfer switching speed.

OutBack Power Systems - Inverters and System Components

OutBack Power Systems is an engineer-owned, customer focused manufacturer of renewable energy systems equipment. Their engineers have decades of power conversion design and equipment installation experience and share a passion for leading the industry into a new era of power conversion equipment performance, ease of use, and standardization.

They have designed all their equipment around an integrated systems approach. One could use an Outback inverter as a stand-alone unit, but its really designed to fit together with all the other pieces of the system.

There are two types of OutBack inverters: the original sealed FX Series and the vented VFX Series. In the sealed FX version all components are cooled by heat transfer. The vented VFX versions are cooled by internal fans. The vented versions allow for higher power inverters to be enclosed in the same size box as the sealed versions.

OutBack inverters can be used alone or with any of the multitude accessories that complete a fully integrated system. Shown on the next page is a pre-wired Flex500 Power System. Call for an explanation of all the various parts which form a complete system and which parts you may want to utilize.

OutBack Power Systems has much more to offer than what’s described here. Four inverter systems are available, as well as three phase systems. An integral step up transformer can be installed in the FW-500 AC enclosure. OutBack has thought of just about everything to make system installation as painless as possible.

Call for more details on OutBack Power Systems equipment.

Performance Features:

• True Sinewave Output
• Low Output Signal Distortion
• Over 3 Times Surge Capacity
• 60A AC Transfer Switch
• Low Idle Power Consumption
• Super Efficient
• Five Stage Smart Charger
• Series Stackable
• Parallel Stackable
• Three Phase Stackable

Design Features:

• Modular
• Expandable
• Compact Size
• Field Repairable
• Powder-coated All Aluminum Die-cast Chassis
• 12, 24 and 48 Volt Models

Double VFX Inverter FLEX500 Kit
Includes two VFX Inverters (any model), FW-MP, FW500-AC , FW500-DC, two FX-DCA’s, two FX-ACA’s, two 175A Inverter Disconnect’s, MX-60 Charge Controller w/Mounting Bracket, 60A Array Disconnect, 60A Charge Controller Disconnect, Set of 10’ 4/0 Inverter cables, 15A 120VAC Receptacle w/15A Breaker, LA302DC Lightning Arrestor, LA302R AC Lightning Arrestor, three RTS’s, MATE and Hub-4.

                    List Price                   $8,450
745-052     Special Kit Price    $7,649

Typical 4.00kw - 7.2kw, 120/240VAC, 60Hz FLEX500 Power System

FLEX 250 System Kit
Includes VFX Inverter (any model), two FW250 Conduit Boxes-AC, Inverter Disconnect, MX-60 Charge Controller, 60A Array Disconnect, 60A Charge Controller Disconnect, Set of 10’ 2/0 Inverter cables, LA302DC Lightning Arrestor, LA302R AC Lightning Arrestor, two RTS’s, MATE and Hub-4.

                    List Price                   $4,717
745-053     Special Kit Price    $4,279

FLEX250 System with one FLEX250 conduit box. Our kit includes a FLEX250 conduit box for the AC (top) as well.

NESE PREWIRED POWER PANEL SYSTEMS
Prewired Inverter/ Charge Controller Systems using Xantrex Components

This is the easiest, quickest and least expensive way to get a Xantrex or Magnum prewired system. We wire the charge controller/ disconnect parts for you. All you have to do is mount the inverter and prewired equipment on a plywood board and hook up the inverter/battery cables and the array wires. All Xantrex equipment is certified to UL standards.