| Number | Gage/Length | Price | >5' + /Ft. |
| 312-025 | 2 Ga 5' Pair | $49 | $5.00 |
| 312-0210 | 2 Ga 10' Pair | $69 | |
| 312-205 | 2/0 Ga 5' Pair | $69 | $9.00 |
| 312-2010 | 2/0 Ga 10' Pair | $119 | |
| 312-405 | 4/0 Ga 5' Pair | $99 | $15.00 |
| 312-4010 | 4/0 Ga 10' Pair | $169 |
Class T Fuse & Fuse Block
| 355-001 | 110 Amp Class T Fuse Block | $59 |
| 355-002 | 200 Amp Class T Fuse Block | $69 |
| 355-003 | 400 Amp Class T Fuse Block | $83 |
The Class T Fuse Block reliably protects high amperage components from overloads and short circuit damage. It utilizes a Class T fuse which provides the highest amps of interrupting capacity (AIC) of any comparable fuse or breaker. The Class T-Fues Block is designed with protective cover and base to meet the installation requirements of the National Electrical Code.
Replacement Class T Fuses
| 346-110 | 110A Class T fuse | $26 |
| 346-200 | 200A Class T fuse | $26 |
| 346-300 | 300A Class T fuse | $45 |
| 346-400 | 400A Class T fuse | $45 |
AMPACITY of COPPER WIRE @ 75° C |
||
| Wire Gauge | In Conduit | In Free Air |
| 14 AWG | 15 amps | 20 amps |
| 12 AWG | 20 amps | 25 amps |
| 10 AWG | 30 amps | 40 amps |
| 8 AWG | 45 amps | 65 amps |
| 6 AWG | 65 amps | 95 amps |
| 4 AWG | 85 amps | 125 amps |
| 2 AWG | 115 amps | 170 amps |
| 1/0 AWG | 150 amps | 230 amps |
| 2/0 AWG | 175 amps | 265 amps |
| 3/0 AWG | 200 amps | 310 amps |
| 4/0 AWG | 230 amps | 360 amps |
MidNite Solar E-Panels
| 757-001 | For Magnum AE Inverters | $799 |
| MNE175/250STM-L-240 | ||
| 757-002 | For OutBack VFX Inverters | $559 |
| MNE175/250STS-L | ||
| 757-003 | For OutBack VFX Inverters | $639 |
| MNE175/250AL-Plus | ||
| 757-005 | For Xantrex TR Inverters | $559 |
| MNE175/250DR/TR-L | ||
| 757-004 | Mini Disconnect | $235 |
| MNDC175/250 |
MidNite Solar has come out with a full line AC/DC disconnects for all brands of inverters and charge controllers. We now feature these disconnects in many of our kits.
The E-Panels include AC bypass and AC input disconnect breakers pre-wired to terminals strips for easy AC wiring installation. There is room for 6 additional AC or DC din rail mounted breakers. The main battery breaker is installed with positive and negative inverter cables from the disconnect to the inverter. (Cables to the battery bank are extra.) Also included is a 500amp/50mv shunt with negative busbar attached, a battery plus busbar, AC busbars (mentioned above), a ground busbar, and lots of hardware for mounting and wiring charge controllers to the disconnect. Wall mounting brackets and complete illustrated instructions complete the package.
The boxes are made of powder coated steel or in some cases, powder coated aluminum. The Mini Disconnect can be used for a charge controller or a simple inverter installation.
E-Panels are by far the nicest, easiest-to-use disconnects in the business.
E-Panel Options
| 757-009 | Array Gnd-Fault 63A | $69 |
| 757-010 | Array Gnd-Fault 80A | $89 |
| 757-006 | White Bus Bar | $17 |
| 757-007 | Red Bus Bar | $17 |
| 757-008 | Black Bus Bar | $17 |
| 343-0xx | DC Din Rail Breakers 150VDC | $14 |
| 1-10,15,20,30,40,63 Amps | ||
| 344-0xx | AC Din Rail Breakers 120VAC | $15 |
| 1-10,15,20,30,40,63 Amps |
Inverter Disconnect and Cable Size |
|||||
| Inverter Model | Breaker Size | Class "T" Fuse | Minimum Cable Gauge | ||
<5' |
5' - 10' | 11' - 20' | |||
| 1500W 12V | 175 A | 200 A | 2/0 Ga. | 2/0 Ga. | 4/0 Ga. |
| 2400W 12V | 250 A | 300 A | 4/0 Ga. | 4/0 Ga. | N/R |
| 1500W 24V | 175 A | 110 A | 2 Ga. | 2/0 Ga. | 4/0 Ga. |
| 2400W 24V | 175 A | 200 A | 2/0 Ga. | 2/0 Ga. | 4/0 Ga. |
| 3600W 24V | 250 A | 300 A | 4/0 Ga. | 4/0 Ga. | 4/0 Ga. |
| 4000W 24V | 250 A | 300 A | 4/0 Ga. | 4/0 Ga. | 4/0 Ga. |
| 4500W 48V | 175 A | 200 A | 2/0 Ga. | 2/0 Ga. | 4/0 Ga. |
| 6000W 48V | 250 A | 300 A | 4/0 Ga. | 4/0 Ga. | 4/0 Ga. |