| DC Wiring Devices | |||||||||||||||||||
12 or 24 volt Receptacles and Plugs
We recommend using a 240 volt type, duplex receptacle and a matching plug for your 12 or 24 volt circuits. These are heavy duty and a different configuration than the 120 volt plugs in your home, so the wrong plug cannot be plugged into either system. The plugs are three pronged so one also cannot turn them upside down and reverse the polarity of an appliance such as a DC fluorescent light. This duplex receptacle takes the same cover plate and wall box as a regular 120 volt duplex receptacle. |
Lighter Plug Wall Plate Receptacle Nice for a cabin or wherever one or two DC outlets are needed. |
||||||||||||||||||
Lighter Plug and Socket Extension
341-013 $9 This cord set can be used as an
extension cord for a fixture with a lighter plug. It can also be used as a
female adapter from your battery bank. Simply remove the plug and directly wire
the socket to your bank using a fuse in the positive line. The cord is 10' long. |
Lighter Plug A plug for the above outlet. Fits in your auto cigar lighter as well. It has a integrated 3A fuse. |
||||||||||||||||||
| Tray Cable
304-012 12 AWG
$0.69/ft. Tray cable consists of two THHN conductors covered by an outer PVC jacket. It is sunlight resistant and approved for direct burial in wet or dry locations. It can be used for module interconnects and sub-array wiring. We stock 12 AWG and 10 AWG. |
Wire by the Foot
Hook-Up Wire
Single THHN Wire, stranded copper. |
||||||||||||||||||
UF Grade Cable
UF stands for underground feeder. UF wire is direct burial, sunlight resistant cable with 1 black, 1 white, and 1 bare ground, all covered with sunlight and water resistant second insulation. For outside wiring, especially as a down lead for each group of four modules. |
UL Listed Battery Cable
This is UL listed Type AWM/TEW/THW X-Flex battery cable. It is composed of many small strands of copper wire. This makes it flexible and easy to use in the large wire sizes.. Pre-made Battery Cables (See
Battery Accessories)
Pre-made Inverter Cables (See Inverters
Cables and Disconnects)
|
||||||||||||||||||
USE Wire
This is a direct burial, sunlight resistant, outside grade, single conductor copper, stranded wire. We use 12
ga. to make our module interconnect cables. It should also be used for wiring between sub-arrays and array mounted junction boxes. We stock it in black or red and in both 10 and 12
gauge. Use 10 ga. for wiring between sub-arrays and 12 ga. for module interconnects.
|
|||||||||||||||||||
| Top |