|
|
  
To move forward through the catalog pages click the next button. To return to the previous page click the previous button. |
Our frames are made of structural aluminum with pre-punched holes for easy assembly. Stainless steel hardware is used throughout and instructions with diagrams are included to facilitate assembly. Adjustable frames can be used for roof, wall or ground mounting. Please specify your brand and type of module.
Single Module Mount
719-001 $30
Four standoff brackets for roof mounting. Stainless steel nuts, bolts and washers
are included. Roof seal included as well. Will fit any
module.
Two Module Frame
710-021 $65
Modules mount on two rails and attach to roof with standoff brackets. Stainless steel nuts, bolts and washers are included.
Two Module Adjustable Frame 710-022 $85
Modules mount horizontally on two rails and attach to roof with four small feet. Two pieces of aluminum angle are included. You drill final four holes for your custom angle adjustment.
Four Module - Rails & Hardware
710-040 $90
Modules mount on two rails using stainless steel hardware.
Four Module Co-Planer Frame
710-041 $140
Modules mount on two rails using stainless steel hardware. Four large feet are supplied to attach this array to your roof.
Vertical Mount Adjustable Frame
710-042 Two 100W
to 185W Panels $190
710-043
Four 50W to 95W Panels $190
Our Vertical Mount
Adjustable Frames will fit four modules of lass than 100 watts each or two
modules over 100 watts each.
The modules mount on two rails with long dimension up and down to facilitate snow sliding. Two connecting braces tie the two module mounting rails together. Adjustable supports, attached to the connecting braces, angle the array towards the sun. The frame can attach to a roof, a wall or vertical 4x4's in the ground using four large mounting feet. (See drawings for more detail).
All the material needed for attaching the frame to supports is
supplied. This includes stainless steel hardware, large mounting feet, hardware to mount the feet to the structure (4"x5/16" stainless steel bolts with toggle wing nuts as well as lag bolts) and a tube of roof sealant.
The adjustment supports come with the first hole punched. Included with the frame is a chart for latitude and roof pitch vs. seasonal angle. You drill final adjustment holes according to your particular situation.
Note: Module Racks are continued on the next web page.
|
[News] [Business] [Catalog] [Contact Info] [Links] If you have questions or comments about the web site or its contents you can e-mail us at spschulze@newenglandsolar.com or call us at 1-800-914-4131, our business hours are 9am to 5 pm daily, Monday through Friday. Enjoy! To contact the webmaster e-mail spschulze@newenglandsolar.com. Thanks Again! |
