Catalog Pg. 65

DC Water Pumping

520-001 Foot Valve $14

For 1" threaded pipe

A foot valve is necessary to maintain prime when pumping into pressure. Although a Shurflo pump will self-prime up to about 16 feet, it will not do so under pressure.

510-001 Filter Screen $8.50

For SHURflo Pumps

Shurflo strongly recommends the use of a filter screen at the input of their diaphragm pumps. If any foreign matter should lodge itself under a diaphragm lip, the resulting loss of suction could severely damage the pump. If you do not need the above installation kit, please be sure to at least purchase this filter screen.

922-002 Pump Head Kit $60

For SHURflo Pumps

This pump head is usually all that is needed to repair any of the Shurflo pumps we carry. If you're really remote, bring a spare along with you. The pump head includes the pressure switch and check valve, as well as the entire diaphragm section of the pump.

Diaphragm / Drive Kit

922-003 For SHURflo Pumps $24.00 D Drive (DSCN1408)

This kit can be used to repair SHURflo Model 344, 145,144 and the Twin Head pumps we sell. It would be used to replace a bad diaphragm, if your pump head housing and pressure switch were still servicable.

Float Switch

520-002 12,24 Float Switch (Dscn0229)

,120 or 230V 13A $49

This single pole double throw float switch can be used to turn a pump on or off depending on the level of liquid in your container. The float is tethered to the side of the tank and is activated depending on the depth of liquid. Wiring and mechanical installations are included.

510-002 High Flow Strainer Kit $18.00

For SHURflo Smart Sensor Pump Hi Flow Filter (DSCN1377)

This filter screen is meant to be placed in the suction line of SHURflo's Smart Sensor pump. It fastens to the input line using the same quick connect fittings that come with the pump.

Note: DC water pumping is continued on the next web page.

Top