|
|
|
To move forward through the catalog pages click the next button. To return to the previous page click the previous button. |
DC Fuses, Circuit Breakers and Timers
Fuse Blocks
These are fuse holders for RK5
cartridge fuses. They can be used in situations where safety is desired,
but code may not be required. They should be installed in an inaccessible
place; or you should manufacture a cover for them.
ATC Fuse Box
Dimensions: 2" x 5 1/2" x 8 3/4"
These fuse boxes use ATC automotive type fuses for DC distribution.
They can be used in a camp or small cottage where a large DC distribution system isn't required.
They have lugs to receive up to #4 ga. input wires. They have either a 6 or 9
circuit fuse block and a negative bus both which will accept up to #10
ga. wires.
ATC Fuse Block
ATC Fuse Holders
354-001 18 Ga. 3" Pigtails $2.00
Cover Included
354-002 12 Ga. 4" Pigtails $2.50
Cover Included
354-004 6 Ga. Maxi Fuse Holder
$13.00
Cover Included
These ATC fuse holders can be used for that instance when only one fuse
may be needed. They are effective and safe, and certainly better than no fuse at all. See
below for fuses.
ATC Fuses
345-005,-010,-015,-020,-025,-030
$0.35 each
5 thru 30 amps respectively
Use these fuses in the ATC fuse box, fuse block or fuse holders described above.
Maxi Fuses
347-020,-030,-040,-050,-060
$2.00
20 through 60 amps respectively
Use the Maxi fuses in the fuse holders described above.
AC Circuit Breaker Box
753-009 $169
Circuit Breakers
The circuit breakers listed below are rated for DC current as well as AC current. They fit in any of our listed circuit breaker boxes
AC or DC. For use in AC circuits all that is needed is a main breaker and a breaker for each circuit. For DC circuits, however, a main switch/fuse box or at least a main fuse should be used between the battery bank and the DC circuit breaker panel. See our prewired DC main distribution panels on the
previous page.
Programmable 12V Timer
909-007 Series 884 Timer $69
With this timer you can control up to 16 amps
(45° C) at up to 250 volts AC or 36 volts DC. It is a 7 day 8 event timer. Once the timer is connected to 12 volts and reset, its internal battery will maintain its quartz clock and programming for up to
5 years. However, it must be connected to a 12 volt source for it switching functions to work. It
only functions as a switch with no normally closed contacts. Dimensions: 2
3/4" x 2 3/4" x 2 1/2" deep.
|
[News] [Business] [Catalog] [Contact Info] [Links] If you have questions or comments about the web site or its contents you can e-mail us at spschulze@newenglandsolar.com or call us at 1-800-914-4131, our business hours are 9am to 5 pm daily, Monday through Friday. Enjoy! To contact the webmaster e-mail spschulze@newenglandsolar.com. Thanks Again! |