Trace SW Plus Series Sine Wave Specifications:
|
MODEL
|
SW Plus 2524
|
SW Plus 2548
|
SW Plus 4024
|
SW Plus 4048
|
SW Plus 5548
|
|
Power Output
|
| Continuous Power: | 2500 watts | 2500 watts | 4000 watts | 4000 watts | 5500 watts |
| Continuous Output: | 21 amps AC | 21 amps AC | 33 amps AC | 33 amps AC | 46 amps AC |
|
Surge Capability: 5 second rating |
80 amps rms | 80 amps rms | 85 amps rms | 95 amps rms | 105 amps rms |
| Peak Efficiency: | 95% maximum | 95% maximum | 94% maximum | 95% maximum | 95% maximum |
| Transfer Relay: | 60 Amps rms | 60 Amps rms | 60 Amps rms | 60 Amps rms | 60 Amps rms |
|
Battery Charger
|
|
Multi-Stage Charging:
|
Bulk, absorption, float/silent, and equalize with Temperature Compensation
|
| Maximum Charge Rate: | 70 amps DC | 40 amps DC | 110 amps DC | 60 amps DC | 75 amps DC |
| Power Requirement: | 20 amps AC | 20 amps AC | 30 amps AC | 30 amps AC | 45 amps AC |
| Bulk Voltage (default): | 28.8 VDC | 57.6 VDC | 28.8 VDC | 57.6 VDC | 57.6 VDC |
| Float Voltage (default): | 26.8 VDC | 53.6 VDC | 26.8 VDC | 53.6 VDC | 53.6 VDC |
| Absorption Time (default): | 2 hours | 2 hours | 2 hours | 2 hours | 2 hours |
|
DC Input Requirements
|
| Search Mode: | <2 watts | <2 watts | <2 watts | <2 watts | <2 watts |
| On Mode (no load): | <16 watts | <20 watts | <16 watts | <20 watts | <20 watts |
| At Full Rated Power: | 120 amps | 60 amps | 190 amps | 95 amps | 135 amps |
| DC Input Voltage (Nominal) | 25.2 VDC | 50.4 VDC | 25.2 VDC | 50.4 VDC | 50.4 VDC |
| DC Input Voltage Range: | 22 to 32 VDC | 44 to 64 VDC | 22 to 32 VDC | 44 to 64 VDC | 44 to 64 VDC |
|
AC Output Characteristics
|
|
Output Voltage:
|
120 VAC
|
|
AC Waveform:
|
Sine Wave, 34 to 52 steps per cycle
|
|
Voltage regulation:
|
+/- 3%
|
+/- 3%
|
+/- 3%
|
+/- 3%
|
+/- 3%
|
|
Frequency Regulation:
|
60 Hz +/- 0.04% (crystal regulated)
|
|
Load Sensing:
|
8 to 255 watts (8 watts default)
|
|
Listings:
|
CSA listed to UL 1741 and CSA107.1 FCC Class B
|
|
Standard Features
|
| |
Adjustable Low Battery Protection
BTS-- standard remote battery temperature sensor for increased battery performance
Variable Speed Brushless DC Cooling Fans
Control Panel--standard built-in, two line, backlit, alphanumeric LCD with 8 LED indicators
|
|
Options
|
|
ICM
|
Optional Full Function Remote Control with LCD and LED indicators (25' or 50' cables)
|
|
ICA
|
Communications Adapter for PC or Modem (RS-232 protocol)
|
|
ISC-S
|
Optional cable for Series Stacking two identical SW Plus units for 120/240 VAC Output
|
|
DCCB
|
Conduit Wiring Box for DC Connections
|
|
ACCB
|
Conduit Wiring Box for AC Connections
|
|
GSM
|
Generator Start Module
|
|
ALM
|
Auxiliary Load Module
|
|
Physical
|
|
Enclosure
|
Indoor Ventilated Galvaneel Chassis with powdercoat finish
|
|
Specified Temp Range:
|
32oF to 77oF output will meet specifications
|
|
Allowed Temp Range:
|
-13oF to 140oF output may not meet specs.
|
|
Weight:
|
105 lbs
|
113 lbs
|
105 lbs
|
113 lbs
|
136 lbs
|
|
Dimensions:
|
21" wide x 15.125" high x 8.875" deep when wall mounted
|
|
Mounting:
|
Wall or Shelf
|
Note: Trace Inverters are continued on page
47.